Upgraded high-speed CAN to 4G full network gateway

Upgraded high-speed CAN to 4G full network gateway

Compared to the old product CAN to 4G, the new high-speed CAN to 4G full network gateway has added an RJ45 interface upgrade program, which has a simple appearance and is easy to carry.

Feature 1: Equipped with 1 4G antenna, 1 CAN interface, 1 SIM card interface, and 1 power interface. The interface pins are defined as follows.

The port is a standard OPEN5 terminal, using a three wire connection, as shown in the table below.

	Pin number	Pin Definition	illustrate
	1	CANH	CANH
	2	COM	CAN signal ground
	3	CANL	CANL
	4	FG	shielding grounding
	5	232TX	RS232 configuration serial port TX
	6	232RX	RS232 configuration serial port RX
	7	GND	RS232 configuration serial port signal ground
	8	NC	hang in the air
	9	24V-	9-36V power input negative terminal
	10	24V+	9-36V power input positive terminal

Feature 2: This product has 2 antenna interfaces, 4G antenna and GPS/Beidou positioning antenna. The regular version does not have positioning function and requires a G suffix to have positioning function.

The SIM card interface is used to connect a mobile phone SIM card, and users need to insert a recharged mobile/China Unicom/China Telecom card before use.

The four LEDs on the converter are all used to indicate functions, as shown in the table below